N320 PowerWash XT Washdown Duty, Three Phase 3/4 HP

Product Description

Applications: Gear reducers, pumps, fans, blowers, conveyors, and other machinery found in food processing, dairies, slaughter houses, beverage plants, car washes, and other high humidity or wet environments or where motor is subject to high pressure wash downs.

Features: 10:1 Variable torque, Constant torque speed range as listed below, MAX GUARD Class F insulation system, 1.15 Service Factor on sine wave, 1.0 Service Factor on IGBT power, Double sealed ball bearings, 303 Stainless steel shaft with spring loaded contact seals in each end shield (Drive end only on TENV motors), Stainless steel conduit box cover, nameplate, fan guard (TEFC only) and hardware, Cast over sized conduit box with high temperature nitrile gaskets and threaded entrance, Plugged drain holes in each end shield for all angle mounting, Internal corrosion resistant coatings on frame, base, end shields, rotor and stator, USDA-approved, white epoxy RUST-OLEUM paint, UL Recognized, CSA Certified and CE Marked

• 3/4 HP
• 1800 RPM
• 208-230/460 Volts
• 56 Frame
• 2.8-2.8/1.4 Amps
• Suitable for 10:1 CT 60 minute duty, otherwise 2:1 CT

Cross Reference: 56T17W5340, 2DAK8

Ships via Freight Truck Only, please provide a delivery address that allows for semi truck for deliveries