X524 Condenser Fan Three Phase Open Air Over Motor 1-1/2 HP

Product Description

X524 Condenser Fan Three Phase Open Air Over Motor 1-1/2 HP

Applications: Commercial condenser fans may be installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling. Used on Trane, Carrier, Climtrol and York units, 5 tons and larger.

Features: Enclosed shaft end bracket, vented frame, 60 degrees C ambient, Automatic reset thermal protector, Nameplate 60/50 hertz 190/380 volts, at next lower HP, Double sealed ball bearings, 5/8" Dia. x 5" long shaft with flat and keyway, Shaft slinger, Threaded lead exit, Patented VCD™ - Voltage Change Device, 4 Locating screws 90 degrees apart, 3.33" from outer edge of shaft slinger, Hubs on both ends will accept resilient base kits, see Accessories section (except X524 and X526 - horizontal only), UL Recognized and CSA Certified

• 1-1/2 HP
• 1140 RPM
• 575 Volts
• 56Y Frame
• 2.2 Amps
• 11 Body Length
• Voltage Change Device feature for quick voltage changes
• No Hubs

CROSS REFERENCES: 56T11O5307

LOW STOCK ITEM.  PLEASE CALL AHEAD BEFORE ORDERING FOR AVAILABILITY