UCT1152 Century Pool Pump Motor 1.5 HP 3600 RPM 56J Frame

Product Description

Century UCT1152 Pool Pump Motor

• 1.5 HP
• 3450 RPM
• 56J FRAME
• SINGLE PHASE
• 230/115 VOLT
• 7.3/14.6 AMP
• 1 S.F.
• SINGLE SPEED
• ODP
• CCWPE
• NO BASE
• C-FACE
• 0.625" X 2.565" SHAFT THREADED 7/16"
• C-DIMENSION 14.70"

**VARIABLE SPEED MOTOR REPLACEMENT EVC165

FEATURES:  Capacitor Start Capacitor Run, Automatic Thermal Protection, Continuous Run, Rolled Steel, Ball Bearings, Sealed Switch Design, UL 1081 Design, Energy Efficient, 

 Service Factor 1.0, Energy Efficient, capacitor start, capacitor run. Electric Motors with dual voltage are normally shipped wired for 220 volts, remember to wire correctly to existing, an error will cause improper function and damage to the pump motor

 CROSS REFERENCES: C1319 5KCR39SN2823AX Hayward Super Pump, Maxflo Pump and Super II pump

ATTENTION: Shipping Restrictions Apply! 

** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **

Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)

To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!