GNS10SS 1 Speed, 1 HP In Ground Pool Pump by Genesis Pump Co.

Product Description

GNS10SS 1 Speed, 1 HP In Ground Pool Pump by Genesis Pump Co.

• 1.0 HP  Listed HP
• Service factor of 1.4 
• 3450  RPM 
• 115/230 Volts, 14/7 Amps, Rated for 50/60Hz
  
• Inlet/Outlet - 2" NPT internal Threads / 2" buttress External threads for pump unions (included)
• High Performance and Ultra Quiet Pool & Spa Pump

GENESIS GNS PUMPS

• GLASS-FILLED ABS CONSTRUCTION IS RUGGED, DURABLE, AND LIGHTWEIGHT

• ADVANCED HYDRAULICS INCLUDE HIGH EFFICIENCY IMPELLER, AND DIFFUSER THAT IS DESIGNED TO FORCE MORE WATER THROUGH THE IMPELLER

• IMPELLER IS MOLDED TO BRASS INSERT FOR STRENGTH

• PULL-OUT DESIGN ALLOWS MOTOR AND HYDRAULIC COMPONENTS TO BE REMOVED FOR SERVICE OR WINTERIZING WITHOUT DISTURBING PIPES

• DRAIN PLUGS ARE GASKETED, SEAL WON'T ERODE WITH EVERY REMOVAL

• LARGE 2” PIPE CONNECTIONS TO ALLOW MAXIMUM FLOW WITH MINIMUM RESISTANCE

• SUCTION AND DISCHARGE PORTS HAVE INTERNAL THREADS AS WELL AS INDUSTRY STANDARD UNION THREAD CONNECTIONS

• HAIR/LINT TRAP HAS CLEAR LID FOR EASY INSPECTION OF BASKET; IMPROVED POLYMERS WILL STAY CLEAR FOR YEARS

• SEPARATE CLAMP LOCKS THE LID 360° WITH LESS THAN A QUARTER TURN, NO TOOLS REQUIRED

• STRAINER BASKET IS AMONG THE LARGEST IN THE INDUSTRY

• LARGE PEDESTAL SUPPORTS BOTH PUMP AND MOTOR

Please seek help with a licensed pool technician to properly size your new pool pump to your pool size. It is also recommended to hire an licensed technician for installation and wiring of this unit to comply with all safety and electrical codes.

Cross Reference SP3010AZ and SP3010EEAZ, Hayward Super II direct replacement

ATTENTION: Shipping Restrictions Apply!! 

• Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect
• Please check your local and State codes to comply with their requirements for replacement pump motors.

Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.

ATTENTION: Shipping Restrictions Apply! 

** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **

Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)

To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!