EP2400 Bearing Protection Ring Conductive Epoxy for mounting

Product Description

• EP2400 Bearing Protection Ring Conductive  Epoxy for mounting
• Install AEGIS Rings directly to the motor end bracket.
• Conductive Silver Epoxy provides excellent electrical conductivity.
• Cures at room temperature in 4 hours at or above 75°F (24°C).
• For faster curing times, heat the bond to between 150°-250°F (66°-121°C) for 10 minutes and allow to cool.
• High-strength conductive bonding provides excellent electrical conductivity.
• Volume: 2 part epoxy; each tube contains 7g.
• Coverage: 2-3 applications.