DJ32E1DM Close Coupled Pump 3 Phase ODP Energy Efficient 1-1/2 H

Product Description

APPLICATIONS:
For the specific requirements of centrifugal pumps where the pump impeller is mounted directly on the motor shaft. Used where dirt and moisture are minimal.
Discontinued when stock is gone and replaced with: DJ32P1D
FEATURES:
-Class F Insulation, Class B Rise At Service Factor
-Rolled Steel Frame
-Aluminum End Shields 140-250, Cast Iron End Shields 280-320
-Oversized Ball Bearings w/Locked Shaft End Construction
-Pre-masked Mylar Nameplate (with CE Mark)
-F1 Assembly Position
-Re-greaseable Bearings 180 Frame & Up, Lifting Provisions 210 Frame & Up
-Double Shielded Bearings
-40*C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power
-JM Shaft For Mechanical Seal
-Full 50 & 60 Hertz Operating Data On Nameplate

SPECS:
HP - 1-1/2
RPM - 3600
VOLTAGE - 208-230/460
FRAME - 143JM
S.F. - 1.15
C DIMENSION - 15.4
FULL LOAD EFF. - 82.5
FULL LOAD AMPS - 4.3-4/2

NOTES: 60/50 Hz rated with no de-rate on HP; 230/460 volt 60 Hz ratings operate on 380V 50 Hz; Full 60 & 50 Hz data on Nameplate; Motors marked 208-230/460 volts may not meet all NEMA (MG-1) performance standards when operated at 208 volts