DJ10P1DP US Motors Special Application Close Coupled Pump Motor 10 HP 3507 RPM 213JP Frame

Product Description

** Product will be discontinued when stock is depleted*

APPLICATIONS:
For the specific requirements of centrifugal pumps where the pump impeller is mounted directly on the motor shaft. Used where dirt and moisture are minimal.

FEATURES:

• Class F Insulation, Class B Rise At Service Factor
• Rolled Steel Frame
• Aluminum End Shields 140-250
• Oversized Ball Bearings w/Locked Shaft End Construction
• Premasked Mylar Nameplate (with CE Mark)
• F1 Assembly Position
• Regreasable Bearings 180 Frame & Up
• Double Shielded Bearings
• 40*C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power
• JP SHAFT for Packing Seal
• Full 50 & 60 Hertz Operating Data On Nameplate

SPECS:

• HP - 10
• RPM - 3600
• VOLTAGE - 208-230/460
• FRAME - 213JP
• PHASE - 3
• ENCLOSURE - ODP
• S.F. - 1.5
• FOOT MOUNTED
• C DIMENSION - 21.6
• SHAFT 1.2495" X 8.125" 
• EN - 1/2-13 X 1.00"
• FULL LOAD EFF. - 88.5
• FULL LOAD AMPS - 27.5-25.3/12.6

NOTES: 60/50 Hz rated with no derate on HP; 230/460 volt 60 Hz ratings operate on 380V 50 Hz; Full 60 & 50 Hz data on Nameplate; Motors marked 208-230/460 volts may not meet all NEMA (MG-1) performance standards when operated at 208 volts

CROSS REFERENCES:  DJ10E1DP, HV54, E372M2, UE372M2, JPM3312T, Q339, 5K213JD122, N725, KM392JP, LM05085, SD2S10TJP61, M118, V213TTDR7316, C522, S476, E372ME, GT2418, MGT2418

 

Ships via Freight Truck Only, please provide a delivery address that allows for semi truck for deliveries