CT1102 Century Pool Pump Motor 1 HP 3600 RPM 56J Frame

Product Description

CENTURY CT1102 POOL PUMP MOTOR

APPLICATIONS: Swimming pool pump motor.  Commonly found on inground pool pumps such as Hayward Super Pump, Maxflo, Super II and many other pumps requiring a 56J frame motor. This is an Energy Efficient rated motor with a High Service factor. Amps are stated based on the full service factor. Century motors are found on most swimming pool pumps.

FEATURES: Capacitor Start-Capacitor Run, Two Compartment, Automatic Overload Protection, Non-Reversible, Standard 1081 Pump Duty, Sealed Ball Bearings, Sealed Switch Design, 303 Stainless Shaft.  Motor has 4 threaded bolt holes on face for mounting the pump to the motor. Bolt holes are 5 7/8" on center measured across the shaft. Energy Efficient Conservationist Motor.

• 1 HP
  
• 3450 RPM
• 56J FRAME
• SINGLE PHASE
• 230/115 VOLT
• 6.8/13.6 AMP
• 1.4 S.F.
• SINGLE SPEED
• ODP
• CCWPE
• NO BASE
• C-FACE
• 0.625" X 2.57" THREADED SHAFT
• 14.70" OVERALL LENGTH

**VARIABLE SPEED MOTOR REPLACEMENT EVC165

CROSS REFERENCES: K48L2N100A1, ECT1072, ECT1102, 5KCR49SN2086X, C1488, MC1488

ATTENTION: Shipping Restrictions Apply! 

** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **

Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)

To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!