B2981 Century Pool Pump Motor .75-.10 HP 3600 RPM R56Y Frame

Product Description

Century B2981 Pool Pump Motor

Features: PSC Low Speed/Capacitor Start-Capacitor Run High Speed, Sealed Ball Bearings, 303 Stainless Steel Shaft, Continuous Duty, Thermally Protected, Horizontal, Energy Efficient.

• 3/4-.10 HP
• 3450/1725 RPM
• R56Y FRAME
• PSC
• 115 VOLT
• 12.2/2.2 AMP
• 1.67 S. F.
• 2 SPEED
• DP
• CCWPE
• NO BASE
• SQUARE FLANGE
• 0.625" X 0.91" THREADED SHAFT
• 13.10" C-DIMENSION

Cross References: SQL1072R, 165982, 177066, 177132, 177143, 190165, 190180, B960, EB981, 5KCR48PN2112X, C1450, MC1450, 35-5375

Important
1.) Total output of replacement motor must equal or exceed motor being replaced. 2.) The pool motors on this page are NOT equipped with a Safety Vacuum Release System SVRS . SVRS helps prevent drowning due to body entrapment on underwater drains. In some pool configurations, if a person's body covers the drain, the person can be trapped by suction. The SVRS turns off the pump if this occurs. Depending on your pool configuration, a SVRS may be required to meet local, state and federal requirements

ITEM DOES NOT CURRENTLY HAVE A TWO SPEED SWITCH AVAILABLE

ATTENTION: Shipping Restrictions Apply! 

** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **

Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)

To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!