Magnum Budgetale 1201i Lift station controller, with indicating terminals to simplify troubleshooting. This simplex sewage lift station control is designed for a 120v single phase motor up to 1 H.P.. Motor must have integral motor overload protection. 1, Indicating terminals- the terminal incorporate a neaon lamp that illuminates when 120VAC is present. This allows owner to trouble shoot most problems visually. 2, Motor contactor- 25 amp contactor with a Hand-Off-Auto toggle switch that selects the pump control. 3, Alarms- High water alarm siren and warning light alert personnel of trouble. 4, Alarm test pushbutton tests the light and warble siren. 5, Alarm silence pushbutton stops alarm siren and indicates that it is silenced. 6, Indoor/Outdoor Enclosure- 10 in. x 8 in. x 6 in. NEMA 4X fiberglass enclosure. 7, Labels- all parts and wires are labeled for easy identification 8, Documentation / Installation and operating instructions, electrical schematic and a parts list enclosed. 9, 1 or 2 float operation (3 floats enclosed, 20 ft cables) also alows for third float for alarms. 10, This unit is built from rugged parts available anywhere in the US, all spare parts stocked. Designed for single phase 120V, 1HP pump with integral motor overload protection Description: The Magnum ‘Budgetale’ lift station pump controller is designed to control a 1 HP, 120VAC, 2 wire overload protected single phase submersible pump. It can be installed indoors or out. A toggle switch selects Hand, Off, and Auto control. In Auto mode either 1 or 2 float switches control the operation of the pump. A contactor is used to run the pump. This removes the load from the float(s) for extended float life. The high level float is connected to an alarm light and siren with silence button. An alarm push to test button allows the light and siren to be checked. All external connections are made to labeled terminal strips with indicator lamps. The entire control is housed in an outdoor rated fiberglass enclosure. Wiring-refer to schematic 0907061 Mounting The control can be mounted either indoors or outdoors. Mount in compliance with National Electric Code rules and regulations. Mount in upright position with hinge on the left side of enclosure.